DryloBag - Grain Bag Drying and Perservation System. 

 Manufactured by DryloBag International

                      Distributed by SETTER MANUFACTURING DIVISION                                                

The Drylobag is a grain Storage Bag and preservation system that aids in drying, aerating and long-term grain storage

 Easy & fast to assembly and a fraction of the cost of traditional bins.

 Consists of a plastic polyethylene bag that will hold up to 200T grain.

 Manufactured with airport pipes into which air is pumped and regulated A standard bagging machine is used to fill the bags.

 

 The structure is sealed and grains are dried by using an aeration control system

 A fan pumps controlled air into the airport pipes and is evenly distributed through the grain to absorb moisture. 

 Moist air escapes through the outlet pipe on the   opposite side of the main poly bag.

 Once dried, the system doubles as a storage unit.

 Grain can be stored up to 18 months. 

 A standard de-bagging machine is used to remove the grain from the bags

SPRAYERS

SPRAYER PARTS

HI-TECH

FLOWMETERS

NH3 KITS

   
  Express Wet Boom Fittings  
                              Improve shut off time- Reduce waste

  Conventional Boom Designs trap air within the boom. This creates a slower reaction time with starting and stopping the Spray from the boom nozzles.

 The Express Nozzle Body end caps, Eliminate Air pockets in the boom, Improving the Diaphragm Check valve reaction time and reducing over application and dribble of  product on the target.

Ideal for Automatic Section Control Systems.

End Cap Assembly

 

 

   

 

     

Diesel Tanks

Diesel Tanks
Features:
  • Tank manufactured from specifically formulated diesel grade polyethylene

   55 Gallon tank with 10GPM Pump $678.60

       * 48"L x 34"W x 21"H

   100 Gallon tank with 10 GPM Pump $776.60   

      *48"L x 34"W x 29"

 

Space Saving Design

Great for Goose Neck Trailer Hitches

 (fits in front of the Hitch)

75 Gallon Tank$727.00

   *51"L x 21"W x 31"H

100 GallonTank$784.70  

   *51"L x 21"W x 38"H

 

 

 

 

 

          

        Fuel Strainer Under Lid

 Setter's Complete Chemical Management System  

 

                             

  •   Management System is plumbed to draw from 3 separate totes or containers

  •     Built to prevent cross-contamination

  •     Each container can be flushed separately without rinsing all the lines    Heavy Duty Steel Frame    Adjustable slide mount for optional Flow Met

                *System draws from 3 separate totes.

                *Built to prevent cross contamination

                *Separate line flushing

                *Heavy duty steel frame

                *Adjustable side mount for optional flow meter

                *42 gallon cone tank with stainless steel knife

                *25' coiled wash hose

 

             3" System Features:

            13 HYPRO POWER PRO ENGINE 2" PUMP

  •     3" System has a 13 HP Hypro PowerPro Engine with Electric Start

  •     Dimensions:  81"L x 36"W x 43"

            2" System Features:

            6.5 HYPRO POWER PRO ENGINE 2" PUMP

  •     3" System has a 13 HP Hypro PowerPro Engine with Electric Start

  •     2" System has a 6.5 HP Hypro PowerPro Engine

  •     2" Hypro Poly Pump (Max. 200 gpm)    Assembled with 2" Banjo Manifold Flanged Fittings    42 Gallon Cone Bottom Tank with stainless steel knife    Dimensions:  79"L x 29"W x 43"H


                       ELECTRIC HOSE REELS

                        

                          -  12 Volt Electric Reel with Remote Control

                          -  2" Reel holds Max. 75' of 2" Sprayer Hose

                          -  3" Reel holds Max. 65' of 3" Sprayer Hose                              

                                       

                          Dimensions: 

                                 2" Hose Reel:    30.5" Wide x 28.5" Long x 26" High

                                 3" Hose Reel:   30.5" Wide x 41" Long x 29" High

 

 

logo.jpg (6819 bytes)

Home Page

Greg Setter, President/General Manager
P.O. Box 686
Russell, Manitoba
Canada, R0J 1W0
Telephone:  (204) 773-2218
Fax: (204) 773-2375
Email: greg@settermfg.com

 

logo.jpg (6819 bytes)

Home Page

Greg Setter, President/General Manager
P.O. Box 686
Russell, Manitoba
Canada, R0J 1W0
Telephone:  (204) 773-2218
Fax: (204) 773-2375
Email: greg@settermfg.com